Vacuum Switch - Click to See Specification Silver Plated Copper Bus Bar Silver Plated Copper Bus Bar

Vacuum Switches, Contactors, and Breakers are typically interconnected within the capacitor bank or harmonic filter bank by silver plated copper bus bar.

 

 


Vacuum Switches, Breakers, &
Contactors

NEPSI's Metal-Enclosed Capacitor Banks and Harmonic Filter Banks utilize vacuum technology for capacitor switching. This technology is best suited for multistage automatic banks and provides for nearly restrike and maintenance free operation. Banks rated at 2.4kV and 4.16kV typically utilize three phase vaccum contactors, while banks rated above 4.16kV utilize vacuum switches.

Very large banks are typically equipped with special purpose draw-out vacuum breakers that are rated for capacitor switching. During the quotation stage, NEPSI determines the best equippment for the application based on the following:

  • Bank/Stage size and voltage rating
  • Switch Features
  • Switch Reliability
  • Switch Cost

 


Lightning Arresters help reduce the possibility of damage from lightning and switching transients.

Three Phase Vacuum Contactor to left is typically applied on 2.4kV and 4.16kV systems.

 

Vacuum Switches to left have a 200 amp, 15kV, 95kV BIL rating. They are tested in accordance with ANSI C37.66 and are capable of switching banks in excess of 3000 kvar at 13.8kV. Similar switches can be applied to 34.5kV systems with bank ratings in excess of 10 MVAR.

Northeast Power Systems, Inc.
66 Carey Road
Queensbury, New York 12804
Phone: 518-792-4776
Fax: 518-792-5767


E-mail: sales@nepsi.com
Website: www.nepsi.com